crystal系列连续激光器
473 nm Blue LaserWavelength
CW output, mW
Low noise option
Transverse mode
Beam diameter (1/e2)
Beam divergence
Output stability, rms
Beam point stability
Polarization ratio
Longitudinal mode
SLM available
Spectrum linewidth
Operating temperature
Operating voltage
Warm-up time
Power consumption
Size of laser head
Size of power supply
473 nm
150, 100, 75, 40, 25, 10, 5; Noise <3%(1Hz-5kHz)
70, 50, 25 mW; Noise <0.5%(1Hz-50MHz)
TEMoo, M2<1.2
0.25 mm
3 mrad
<2% over 8 hrs; Ultra-stable option: <0.25% over 24 hrs
+/-0.005 mrad/C
> 50 : 1
2-4 longitudinal modes
Single longitudinal mode with >100m coherence length
0.1 nm, nominal; SLM version: < 10-5 nm
10 to 35 degree C
90-250 VAC or 9-20 VDC
1 minute
15 W
3 x 3 x 12 cm with a fixed 6 mm thick base plate
AC: 5x14x15 cm (2x5x6 inch) DC: 3.5x8.5x12.7 cm
CW Green Laser
Laser wavelength, nm
Laser Crystal
Output power, mW
Output stability, rms
Noise, rms
Transverse mode
Beam diameter (1/e2)
Beam divergence
Beam point stability
Polarization
Operating temperature
Operating voltage
Warm-up time
Power consumption
Size of laser head
Size of power supply
Expected laser life time532 nm (515 nm 523, 527, 542, 555, 561, 593 nm available)
Nd:YAG, Nd:YVO4
1000, 500, 300, 200, 150, 100, 75, 50, 25, 10, 5
<2% over 8 hrs;Ultra stable option: <0.25% over 24 hrs
<0.5%, 10Hz - 50MHz, for S- and L-version lasers
TEMoo, M2<1.1
0.36 mm (2X beam expander, beam size 0.7 mm)
2 mrad (with a 2X beam expander, divergence 1 mrad)
+/-0.005 mrad/C
Linear; Polarization ratio > 50:1; or >100:1 option
10 to 35 degree C
90-250 VAC or 9-24 VDC
1 minute
15 W
3 x 3 x 12 cm with a fixed 6 mm thick base plate
AC: 5x14x15 cm (2x5x6 inch) DC: 3.5x8.5x12.7 cm
>10,000 hours (MTBF)
Model numberGCL532-xxx-S
SLM-versionGCL532-xxx-L
Low noise versionGCL532-xxx
Standard-version
Longitudinal mode
Spectrum linewidth
Coherence length
Amplitude noise, rmsSingle (SLM)
<0.00001 nm
>300 meters
<0.5%Several
0.1 nm
1-5 mm
<0.5%Several
0.2 nm
1-3 mm
~20% at 500kHz
CW Infrared Laser
Wavelength, nm
Max TEMoo output
Max SLM output option
Available output option
Transverse mode
Beam diameter (1/e2)
Beam divergence
Output stability, rms
Beam point stability
Polarization plane
Polarization ratio
Amplitude noise, rms
Wavefront distortion
Longitudinal mode
SLM version
Spectrum linewidth
SLM version
Operating temperature
Operating voltage
Warm-up time
Power consumption
Size of laser head
Size of power supply
Expected life time
1064 1053 / 1047 1342 1313 / 1319 / 946 1030
3 W 2.5 W 1.5 W 1 W 300 mW
1 W 200 mW 300 mW 200 mW 200 mW
3W, 2.5W, 2W, 1.5W, 1W, 700, 500, 300, 100, to <20 mW
TEMoo, M2<1.1
0.45 mm; 2x-9x beam expander option available
3.6 mrad; Option: a 4x beam expander reduced to <1 mrad
<1% over 2 hrs; Ultra-stable option: <0.25% over 24 hrs
+/-0.005 mrad/deg C
1064,1047,1342 nm horizontal; 1053,1313,1319,946 nm vertical
>100:1
< 1%, 10Hz - 1MHz
< l/10
Several longitudinal modes with coherence length 1 - 5 mm
Single longitudinal mode with >300 meters coherence length
0.3 nm, nominal; 0.1nm / 0.05nm narrow linewidth option
< 10-5 nm
10 to 35 deg C
90-250 VAC or 9-24 VDC
1 minute
15 W, typical
3 x 3 x 12 cm with a fixed 6 mm thick base plate, or
3.6x5x18 cm / 3.6x7x20 cm (HxWxL) for high output lasers
AC: 5x14x15 cm (2x5x6 inch) DC: 3.5x8.5x12.7 cm
> 10,000 hours
页:
[1]