宏命令应用
我用范成建《虚拟样机软件MSC.ADAMS应用与提高》中关于用宏命令建立齿轮的应用，出现三个同样类型的错误：
ERROR: ---------------------------------------------------------------------
ERROR: Error detected on line number 123, character 6 of poly_gear.cmd.
ERROR: No Reference_Frame was found because 'close' does not exist beneath '.gear_5'.
ERROR: The command was not executed.
ERROR: &> close=yes relative_to=.gear_5.PART_2.MARKER_1
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: No Wire_Geometry was found because 'tmp_poly' does not exist beneath '.gear_5.PART_2'.
ERROR: The command was not executed.
ERROR: &> .gear_5.PART_2.gear1profile_curve=tmp_poly&
ERROR: ---------------------------------------------------------------------
ERROR: ---------------------------------------------------------------------
ERROR: No Geometry was found because 'tmp_poly' does not exist beneath '.gear_5.PART_2'.
ERROR: The command was not executed.
ERROR: >> geometry delete geometry_name=tmp_poly
ERROR: ---------------------------------------------------------------------
请宏高手指点！
涉及到的宏命令只有三行（红字部分）：
file text write&
format_for_output="close=yes relative_to=%s"&
values_for_output=($center_marker) newline=yes
file text close
variable delete variable=$_self.inc
variable delete variable=$_self.a_inc,$_self.num_teeth,&
$_self.out_rad,$_self.in_rad,$_self.out_rad2
file command read file_name=poly_gear
geometry create shape extrusion extrusion_name=&
$ref_part_name.$gear_name profile_curve=tmp_poly&
reference_maker=$center_maker length_along_z_axis=$thickness
geometry delete geometry_name=tmp_poly
命令全文见附件
页:
[1]