求教有关Fluent读入时出错？

gaihengxu

我是菜鸟，刚刚做Fluent模拟，今天用Gambit做了一个二维图，就是一个循环风道，里面加了一个风扇（fan）。网格化好后，导入Fluent老是出现错误提示:'( :'(

> Reading "D:\WEIXIHUA3.msh"...
   10670 nodes.
     113 mixed wall faces, zone  5.
       2 mixed pressure-outlet faces, zone  6.
       2 mixed pressure-inlet faces, zone  7.
      30 mixed interior faces, zone  8.
     882 mixed wall faces, zone  9.
     891 mixed wall faces, zone 10.
     281 mixed symmetry faces, zone 11.
   18458 mixed interior faces, zone 13.
     465 quadrilateral cells, zone  2.
    5226 quadrilateral cells, zone  3.
    4292 quadrilateral cells, zone  4.
Building...
     grid,
Note: Separating wall zone 5 into zones 5 and 1.
      wall -> wall (5) and wall:001 (1)
Note: Separating interior zone 8 into zones 8 and 12.
      jiarequbianjie -> jiarequbianjie (8) and jiarequbianjie:012 (12)
Note: Separating wall zone 9 into zones 9 and 14.
      waibianjie -> waibianjie (9) and waibianjie:014 (14)
Note: Separating wall zone 10 into zones 10 and 15.
      neibianjie -> neibianjie (10) and neibianjie:015 (15)
Note: Separating wall zone 10 into zones 10 and 16.
      neibianjie -> neibianjie (10) and neibianjie:016 (16)
Note: Separating interior zone 13 into zones 13 and 17.
      default-interior -> default-interior (13) and default-interior:017 (17)
Note: Separating interior zone 13 into zones 13 and 18.
      default-interior -> default-interior (13) and default-interior:018 (18)
Warning: Inappropriate zone type (interior) for one-sided face zone 8.
         Changing to wall.
     materials,
     interface,
     domains,
     zones,
default-interior:018
default-interior:017
neibianjie:016
neibianjie:015
waibianjie:014
jiarequbianjie:012
wall:001
default-interior
duichenmian
neibianjie
waibianjie
Error: Cannot change jiarequbianjie to interior because
there is only one adjacent cell thread.
Error Object: #f
jiarequbianjie
rukou
chukou
wall
baowencheng
fengdao
jiarequ
        creating neibianjie-shadow
     shell conduction zones,
Done.


请各位好心人忙帮分析分析，小弟不胜感激，谢谢！

romans

网格划分 zone 8有问题

luluctgu

Error: Cannot change jiarequbianjie to interior because
there is only one adjacent cell thread.

你怎么解决这个问题的 我知道肯定是模型的问题 我现在也遇到这个问题了

jimee_lzj

jiarequbianjie，这个命名的边界只为一个zone的面，不能设置成interior，只能是wall之类的边界。interior使用于两个zone共同的面边界。