|
|
楼主 |
发表于 2010-12-2 18:39
|
显示全部楼层
本帖最后由 Rainyboy 于 2010-12-2 18:40 编辑
参考文献，大家可以去找来读读。
[1]Akyildiz IF, Su W, et al. Wirless sensor networks: a survey[J]. Computer Networks.2002,38(4).
[2]Joseph A D. Energy harvesting projects [J]. IEEE Pervasive Computing, 2005, 4.
[3]Williams C B, Shearwood C, Harradine M A, et al. Development of an electromagnetic micro-generator[J]. Circuits, Devices and Systems, IEEE Proceedings.2001,148(6).
[4]Roundy S, Wright P K, Pister K S. Micro-Electrostatic Vibration-to-Electricity Converters [J]. Fuel Cells,2002,220.
[5]崔莉,鞠海玲,苗勇.无线传感器网络研究进展[J].计算机研究与发展,2005.42(1).
[6]薛欢.压电俘能/储能系统的非线性动力学行为分析与优化[D].华中科技大学,2008.
[7]胡洪平.低频压电俘能器研究[D].华中科技大学,2006.
[8]潘家伟.基于压电效应的能量搜集[D].南京航空航天大学,2008.
[9]李雯.基于雅典悬臂梁的环境振动能量获取方法的初步研究[D].天津大学,2008
[10]张国良.压电振子在旋转机构上的发电能力的试验研究[D].吉林大学,2006
[11]栾桂冬,张金铎,王仁乾,压电换能器和换能器阵[M],北京大学出版社(2005).
[12]A.Preumont, Dynamics of Electromechanical and Piezoelectric Systems [M].Springer.
[13]杨拥民,张玉光,陈仲生,陶利民,邓冠前.基于压电陶瓷的振动能量捕获技术现状及展望[J].中国机械工程,2009,1(20).
[14]陈子光,胡元太,杨嘉实,基于扭转模态的角振动压电俘能器研究[J],应用数学和力学,2007,6(28).
[15]Yang Jiashi , Zhou Honggang , Hu Yuantai , et al. Performance of a Piezoelectric Harvester in Thickness- stretch Mode of a Plate[J] . IEEE Transactions on Ultrasonics , Ferroelectrics , and Frequency Control ,2005.
[16]Hagood N W, Flotow A V. Damping of structural vibrationswith piezoelectric materials and passive electrical networks[J]. Journal of Sound and Vibration, 1991, 146 (2).
[17]Jordi B P , Manel P V. Electromechanical Model of a Multi - layer Piezoelectric Cantilever [ C]/ / 7th International Conference on Thermal , Mechanical and Multiphysics Simulation and Experiments in MEMS. Milano ,Italy ,2006 :127.
[18]Anderson T A , Sexton D W. A Vibration Energy Harvesting Sensor Platform for Increased Industrial Efficiency [J] . SPIE , 2006 , 6174 : 6212629.
[19]JG Smits, SI Dalke and TK Cooney, The Constituent Equations Of Piezoelectric Bimorphs, Sensors and Actuators A,1991,28.
[20]JG Smits, A Ballato. Dynamic Behavior of Piezoelectric Bimorphs. Ultrasonics symposium 1993.
[21]Jan G Smits and Wang-shing Choi, The Constituent Equations of Piezoelectric Heterogeneous Bimorphs. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control,1991.
[22]Platt S R , Farritor S , Haider H. on Low – Frequency Electric Power Generation with PZT Ceramics [ J ] .IEEE/ ASME Transactions on Techtronic , 2005.
[23]Qing Qu, XiaoQi Chen, A Two-mass Cantilever Beam Model for Vibration Energy Harvesting Applications, 6th annual IEEE conference on Automation Science and Engineering,2010.
[24]郑哲敏,周恒 等.21世纪初的力学发展趋势[J].力学进展,1995,4(25).
[25]赵冬冬.压电智能结构模态控制研究[D].河北工程大学,2007.
[26]田海民.智能悬臂梁的振动控制及其优化配置[D].兰州理工大学,2008.
[27]黄文虎,王心清,张景绘,郑钢铁.航天柔性结构振动控制的若干新进展[J].力学进展,1997,27(1).
[28]王建军,李其汉,具有分支电路的可控压电阻尼减振技术[J],力学进展,2003,3(33)
[29]李山青,刘正兴,杨耀文,压电材料在智能结构形状和振动控制中的应用[J],力学进展,1999.29(1).
[30]王建军,姚建尧,李其汉,分支电路压电阻尼系统的分析模型和基本特性[J],工程力学,2005,22(6).
[31]杨智春,孙浩,崔海涛,压电分流阻尼控制悬臂梁振动的参数优化分析[J],机械科学与技术,2005.24(6).
[32]杨智春,崔海涛,孙浩,压电分流阻尼控制悬臂梁振动的实验研究[J], 机械科学与技术,2005.24(5).
[33]李宁,张景绘,压电分流阻尼系统的重置开关控制[J],西安交通大学学报,2006,40(7).
[34]姚军,李岳锋,刘娟,压电薄板的建模和阻尼的准独立模态控制[J],航空学报,2000,21(2).
[35]唐永杰,晏砺堂,胡选利,涨升毕.结构振动控制中压电阻尼技术研究（三）:机敏约束层阻尼技术[J].压电与声光,1996,18(2).
[36]唐永杰,晏砺堂,胡选利,涨升毕.结构振动控制中压电阻尼技术研究（二）:压电主动阻尼技术[J].压电与声光,1996,18(2).
[37]Warkentin D J, Hagood N W, Nonlinear Piezoelectric Shunting for Structural Damping, In: Proc SPIE, Smart Structures and Materials,1997,3041.
[38]IEEE Standard on Piezoelectricity. An American National Standard, ANSI/IEEE Std 176-1987.
|
|
发表于 2010-12-2 18:15
提升卡
变色卡
显身卡
发表于 2010-12-3 00:33
发表于 2010-12-3 11:24
